![Investigation on the Potential of a CO2 Capture System, Downstream of the Aftertreatment System for a Heavy-duty Engine Application için kapak resmi Investigation on the Potential of a CO2 Capture System, Downstream of the Aftertreatment System for a Heavy-duty Engine Application için kapak resmi](/client/assets/d79c3e4af2b6d196/ctx/images/no_image.png)
Investigation on the Potential of a CO2 Capture System, Downstream of the Aftertreatment System for a Heavy-duty Engine Application
Başlık:
Investigation on the Potential of a CO2 Capture System, Downstream of the Aftertreatment System for a Heavy-duty Engine Application
Yazar:
Pathak, Murchana, author.
ISBN:
9780355979138
Yazar Ek Girişi:
Fiziksel Tanımlama:
1 electronic resource (108 pages)
Genel Not:
Source: Masters Abstracts International, Volume: 57-06M(E).
Advisors: Jeffrey D. Naber; Alexander K. Voice Committee members: Tom Tzanetakis.
Özet:
The transportation sector accounts for the second largest source of CO 2 emissions after power generation. New Corporate Average Fuel Economy (CAFE) regulations are focusing on improving energy through reduced fuel consumption and greenhouse gas emissions. This work investigates the potential of a CO 2 capture system downstream of an aftertreatment system for a heavy-duty engine application. Amine absorption has been described as one of the most effective ways to capture CO2 from the exhaust for point sources. Therefore, using thermal-swing absorption process with potassium carbonate (K2CO3) as the absorbent liquid, a process was analyzed for onboard CO 2 capture with a 15-liter heavy-duty truck engine. The CO2 capture system comprises of a CO2 absorber that separates CO 2 from the exhaust; a CO2 stripper or regenerator that regenerates the absorbent liquid; heat exchangers and coolers for maintaining the required temperature of the system; and a compressor for compressing the CO2 for storage. The operating parameters of the CO2 capture system, including liquid flow rates, lean/rich loading were estimated by assuming a driving force for the mass transfer. The regenerator pressure was determined from the vapor-liquid equilibrium data as a function of temperature and lean CO2 loading. The components of the system were designed and simulated individually in GT-Suite at a 60% CO2 capture rate and this allowed for the determination of liquid flow rates, outlet temperature and the heat transfer across the system for a mid-speed, mid-load operating condition. The components are then integrated in GT-Suite to form a CO2 capture system model downstream of the aftertreatment system. The system performance was then determined for different exhaust gas conditions representative of the Supplemental Emissions Test (SET) operating conditions from idle to full load. The CO2 capture requires both heat and power for the absorption as well as the separation process which can utilize the energy extracted from waste heat recovery system (WHRS). The exhaust heat would be used to heat the solvent and desorb the CO2 in the stripper. Unlike point sources, the onboard CO2 capture system has challenges such as space limitations and availability of processes and cooling water. However, exhaust heat also provides a low-cost source of waste heat not typically available at stationary power plants. This work aims to determine the heat duty, cooling duty, and compression work required for capturing CO2 at different engine operating conditions.
Notlar:
School code: 0129
Tüzel Kişi Ek Girişi:
Mevcut:*
Yer Numarası | Demirbaş Numarası | Shelf Location | Lokasyon / Statüsü / İade Tarihi |
---|---|---|---|
XX(688136.1) | 688136-1001 | Proquest E-Tez Koleksiyonu | Arıyor... |
On Order
Liste seç
Bunu varsayılan liste yap.
Öğeler başarıyla eklendi
Öğeler eklenirken hata oldu. Lütfen tekrar deneyiniz.
:
Select An Item
Data usage warning: You will receive one text message for each title you selected.
Standard text messaging rates apply.